Find out how to Plunge Cut With a Hand Wood Router


A plunge cut is a form of cut that goes in the the top of a material from above. Plunge-cutting having a router should be done which has a specific plunge router as well as a plunge-cutting router bit - a router bit with a bottom cut facility, which means their cutting edges extend throughout the bottom of the bit. Other routers are fixed base routers and won't be well suited for making plunge cuts.

Make sure you possess the right form of router bit. Make sure the bit you decide on was created to plunge-cut, or, the top will spin up against the surface of the material and will probably burn it. Plunge cutting router bits may be labelled as bits which has a bottom cut function, but if you're unsure always check the specifications of individual bits before you use them. Using the wrong equipment damages your machinery along with your workpiece.

Set the height of your respective router bit. In order to plunge-cut into a particular depth, you must set the depth on the router before working. How we do this depends on the company of router you decide on, but most make use of a type of depth stop (often a rod and column) which can be adjusted on the height you require. The depth stop limits how long into material the bit can be lowered. The Trend branded routers have a very 3 turret depth stop that enables you to pre-set 3 separate heights for plunge cutting that will simply be changed when you work.

The first step. Start the router and minimize the bit down on top of the workpiece.

Step two. Once the bit has cut over the surface, it is possible to slowly move the router to generate your favorite cut.

Make deeper cuts progressively! Plunging deeper than several millimetres having a single cut really should not be done. Instead, you ought to produce a number of shallow cuts which will get progressively deeper. Because of this less strain is scheduled about the cutting edges of your router bit, and so on the router's motor itself.

Take regular breaks. Every now and then you ought to bring the router bit back up out of your material swap the router off therefore the motor and router bit can cool-down, and you can clear any debris in the cut. It's also advisable to clear any waste through the cut to stop it from becoming clogged. Be sure to work with an appropriate dust extractor with the routers.

To read more about atc cnc router please visit webpage: read this.